30x60 Metal Building

From US$ 32,400.00

Grow into more space without wasting footprint with this 30x60 metal building. You get 1,800 square feet of clear-span storage or shop area, ideal for multi-bay parking or a long, narrow barndo or shop house layout. Set your eave height, door sizes, and bay configuration to fit your property. 

Dimensions: 30'x60' (Available heights - 10'-30')

Secure the best price on your new 30×60 metal building. Choose your custom options for this building and get competing quotes from local suppliers.

Wall Color
Roof Color
Trim Color

Get Estimates3D Customize

SKU: BGSZ4003 Width: 60' Length: 80' Height: 12' Category:

* Price is for the shell only, varies by location & doesn't include foundation, installation, or interior walls

30x60 Metal building features

  • Product Description

    Our 30×60 metal building package delivers 1,800 sq ft of clear span interior space for an extended three-to-four-bay garage, a contractor shop or equipment shed, or a three-bedroom home or barndominium shell with an attached drive-through shop. You choose the eave height to clear service trucks, RVs, or farm equipment while keeping a compact footprint.

    Popular 30×60 building applications by height:

    30x60x10 metal building 3-6  car garage with workshop
    30x60x12 metal building 3 bay auto shop, 3 stall horse barn with tackroom
    30x60x14 metal building RV garage with 2-4vehicle parking
    30x60x16 metal building Two-story, 3-bedroom barndominium or  2-bed shop house
    30x60x20 metal building Farm machine shed, small warehouse, or storage barn

    Each kit includes pre-cut steel I-beam primary framing, secondary purlins and girts, 26-ga PBR roof and wall panels, and a complete trim package. The number, width, and height of framed door openings are fully customizable, so you can mix endwall and sidewall doors for flexible access and traffic flow.

    Plan at least 2 ft of clearance between the top of the tallest door and the eave height; for example, a 12 ft tall overhead garage door needs a 14 ft eave height.

    30x60x12 two bay drive through garage with lean to

    Unlike light-gauge tubular structures and pole barns, these trussless red iron PEMBs are custom-engineered to satisfy or surpass local building codes for snow, wind, and seismic requirements, providing a straightforward permitting process for barndominiums and other residential applications while adding value to your property.

    Three bedroom 30x60 barndominium with wrap around porch

    At 1,800 sq ft, a 30×60 steel building is often DIY-friendly for builders with some hands-on experience, or it can be erected by a local steel crew if you prefer a turnkey installation. The rigid frame on a concrete slab makes it easy to insulate, finish interiors, add partial mezzanine lofts, or plan for future extensions at one end. Use this 30×60 building package as your base design, then customize door layouts and heights, windows, lean tos, insulation, and color combinations.

    30x60 2 bay shop with porch in two tone gay

    Get guaranteed fast delivery with 20 shipping points, including California, Texas, Georgia, Florida, Oklahoma, and Ontario, Canada.

    Request competing quotes from vetted local suppliers to fine-tune specs and timelines before you buy.

  • Specifications

    Metal building specs:

    Width: 30 feet
    Length: 60 feet
    Eave height: 12 feet
    Square feet: 1,800 Sq Ft
    Roof style: Gable
    Roof pitch: 3:12
    Walk doors: 1
    Overhead doors: 1
    Windows: 0
    Wind load: 70-160 mph
    Snow Load: 10-110 psf

  • What's Included

    Kit packages include:

    • Steel I-Beam framing
    • Steel roof & wall panels (26ga)
    • Complete trim package
    • Two framed door openings
    • Foundation anchor bolt plans
    • Engineer stamped plans
    • Building delivery
    • Installation instructions
    • All bolts, flashing & sealants

    Framing for Pre-Engineered Steel Building
    I-beam steel framing
  • Features

    Benefit from:

    • Bolt-up construction
    • Primary framing: Steel I-beams
    • Second framing: steel purlins & girts
    • PBR metal wall & roof panels: 24 or 26 ga.
    • Trussless roof design
    • Clearspan widths to 300'
    • Bay spacing: 20', 25', and 30'
    • Widths: 30' to 300'
    • Heights: 10' to 40'
    • 30+ year warranty
    • Fast, free delivery
    • Fast build time

  • Customization

    Custom options:

    Doors - Choose overhead doors, rollup, sliding or bifold doors.

    Roof profile & pitch - Adjust the gable roof pitch or select a single-slope, gambrel, or monitor profile

    Insulation - Opt for vinyl-faced fiberglass, spray foam, or insulated metal panels (IMPs).

    Structural upgrades - Add porches, overhangs, a carport lean-to, or a mezzanine for loft storage.

    Color options - Mix and match 22 standard colors for roof, walls, trim, and wainscot. Download our color chart.

    BuildingsGuide PBR metal panel color chart for roofing and siding
    BuildingsGuide PBR metal panel color chart
  • Exclusions

    Items not included:

    • Permits
    • Foundation
    • Installation
    • Insulation
    • Interior build out

Get Four Quotes

Compare prices from local suppliers and save
Get Prices

Frequently asked questions

  • How much does a 30x60 metal building with slab cost?

    The typical cost to construct a 30-by-50 metal building, fully installed, ranges from $48,600 to $72,000. This encompasses the building package at $18- $22/sq ft, the concrete foundation at $ 4–$8/sq ft, and the construction labor at $5- $10/sq ft. You will also need to budget for doors, windows, and insulation.

  • Do I need a building permit for a steel building?

    Yes. Unless you are on exempt farmland, you will likely need a permit. Larger buildings or those intended for commercial occupancy often face stricter regulations.

    Checklist for success:

    Check Zoning First: Ensure your land is zoned for this type of structure before paying for permits.

    Get Certified Plans: Building officials require certified plans for the structure and foundation. Your building supplier will provide building plans, and your structural engineer will provide the foundation plan

    Hire a Surveyor: You will need an official site plan created by a licensed professional.

    Stick to the Plan: Changes made during construction require re-permitting. Stick to the certified blueprints to avoid additional fees.

  • What are my options for installation?

    When it comes to erecting your 30x60 metal building, you have three main options, these include:

    Do-it-yourself (DIY). We only advise going this route for smaller buildings (under 2,000 square feet) and for those with previous construction experience.

    Self-manage. With a self-managed project, you are responsible for hiring and managing the various sub-trades, including the concrete company for the foundation, the steel erectors to construct the building, plumbers, electricians, etc.

    Hire a General Contractor (GC). For a completely hands-off option, you may want to consider hiring a GC who will manage the entire project on your behalf, from pulling permits and installation to the final inspection. Expect to pay 10-20% for a GC's services.

  • What financing options are available for metal buildings?

    Here are the most common options for financing a new building.

    • Consider home improvement loans for smaller projects, such as small metal shop buildings, standard garages, or shops.
    • Home Equity Line of Credit (HELOC) is more flexible and has competitive rates, but you must use your home as collateral.
    • Construction loans are ideal for larger residential and commercial projects.
    • Farm credit for agricultural and farm building projects is the final option.

  • How many cars can fit in a 30x60 garage?

    For comfortable daily use, a 30x60 garage fits 5 to 6 cars, allowing ample room to open doors.

    If used for maximum storage (parking bumper-to-bumper in tight rows), you can fit 8 to 10 cars.

    Total capacity ultimately depends on vehicle size and whether your doors are on the long or short wall.

  • How long does it take to construct a 30 by 60 metal building?

    Red iron buildings can typically be erected by a professional crew (4 installers) in approximately three to five days. A DIY build generally takes 4 to 8 days. The foundation will need to be in place and have had several days to cure.

Have a question? We're here to help.

Why choose us?

BuildingsGuide simplifies the process of finding reputable suppliers of prefab metal buildings, allowing you to select the ideal vendor for your needs and budget.

Since 2004, over 200K buyers have saved an average of 28% on their project with our multiple quote service.

Proudly serving customers in the United States & Canada for over 20 years.

Compare & save!

Let us help you find the best deal on a metal building for sale.

  • Tell us about your project
  • We match you with vetted suppliers
  • You receive four competing quotes
  • Select the most suitable supplier
  • Start your project